Armco barriers

Heavy Duty Armco Rail

Material: Galvanised Steel (Untentioned)
Length: 3.516m (effective 3.2m)
Depth: 311mm
Style: Corrugated
Bolts needed: M16 x 35 (lap bolts)
Qty needed: 8 per rail

Fishtail End

This is the most popular terminal end used to complete a barrier system.
Material: Galvanised Steel
Length: 750mm
Overhang: 430mm
Bolts needed: M16 x 35mm
Qty: 4 per fishtail

Pedestrian End

A terminal end used to protect pedestrians from injuries such as cuts and bruises, usually where the end of a run stops for a door way.

Material: Galvanised Steel
Length: 531mm
Overhang: 230mm
Bolts Needed: M16 x 35mm
Qty: 8 per end

Plastic Yellow End Cap

Used at the end of a barrier system to give a ‘high visibility’ effect which slides onto the end of the barrier.

Material: Plastic

No bolts required

Internal Corner

Material: Galvanised Steel
Angle: 90o which can also be utilised at a 45o angle. Used to divert barrier runs.
Impact: Internal
Length: 588mm x 588mm
Overhang: 260mm
Bolts required: M16 x 35mm
Qty: 8 bolts per corner

External Corner

Material: Galvanised Steel
Angle: 90o which can also be utilised at a 45o angle. Used to divert barrier runs.
Impact: External
Length: 588mm x 588mm
Overhang: 260mm
Bolts required: M16 x 35mm
Qty: 8 bolts per corner

Z Leg – Bolt Down

Height: 560mm or 760mm
100 x 30 x 6
Base Plate: 200mm x 200mm

Z Leg – Cast in

Height: 1200mm
110mm x 50 x 6
Base Plate: 200mm x 200mm

I Leg (UB/RSJ Heavy Duty) –
Bolt Down

Height: 560mm, 760mm or 1100mm (For double rail)

Leg Dimension: 127 x 76mm
Base Plate: 250 x 330mm

If you need a non-standard leg please do not hesitate to contact us with your requirements.

Handrail Extension

Retro Fix to UB/RSJ heavy duty leg, for Z leg retro fit please contact our customer services.

M16 x 150 (Floor Fixings)

Zinc Coated

M16 x 50mm (Leg Bolts)

Galvanised